|
| Home> Photo Printing at Home> Hi-Touch Dye Sub Photo Printers> HiTi 641PS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The 641PS is a 400dpi resolution printer like the 640PS. Print quality is even better than all other models in the range, however, you have to look really close to notice any differences. Given that the top of the range 730PS prints at the 300dpi resolution (equiv, to 4800 dpi inkjet printer) on 8x6 paper and the results are still stunning, the extra 100dpi of the 641PS may not be noticable, especially on a 6x4 print! The 641PS will print a 6x4 photo in only 75 seconds! this is significantly faster than the 631PS which takes 130 seconds (2 minutes and 10 seconds) to print the same photo. At either print speed this is still faster than a lot of Inkjet Photo Printers. The HiTi 730PS is the next model in the range and provides the ability to print not only 6x4, but 7x5 and 8x6 prints also. The 641PS also supports the monochrome KO photo kit, which only the Photoshuttle, 641PS and the 640PS support. All of the other models will however print pictures in monochrome using the standard colour ribbon. If you are planning to do lots of monochrome images you may wish to use the monochrome KO kit for best results. The 641PS also supports MultiMedia, Secure Digital and Memorystick memory in addition to the CompactFlash & Smartmedia that the 630PS / 631PS support. Xd memory can also be used via an additional adapter. USB storage devices, pen drives and USB cameras can be attached to the 641PS using the USB port on the printer. The 6x4 prints are not only borderless but are waterproof and fingerprint resistant, the special paper used is almost tear proof ensuring that your photo quality prints stay that way. Prints can be either Gloss or Matt finish and this can be selected using the easy to use Photo Desiree software. This software can be downloaded here for you to try before purchase if required. As with all HiTi Photo Printers the quality is superb, with the ability to print 16.77 million true colours, it's no wonder that some professional photographers use HiTi photo printers instead of conventional photo labs!
Once the memory card is installed in the printer, images can be selected using the hand controller on the left hand side of the unit. This controller has a built in LCD screen which allows you to select which pictures you wish to print and how you wish to print them. If your camera supports DPOF, you can select the pictures to print on your camera by simply pressing a few buttons on the 641PS - the appropriate images will then be printed. The 641PS also supports Pictbridge linking that allows you to connect your camera direct to the printer, (if your camera supports this function). A carry case is available as an optional extra if you want to carry your printer around. The unit is compact at 8.8 x 8.3 x 5.5 inches (22.4cm x 21cm x 14cm) and so will fit on even the smallest of desks. The printer only weighs 5.9lbs (2.7kgs) The 641PS is powered from the mains and will operate from 110-240vac at 50/60 hz with a typical maximum power consumption of 150 watts when printing; this is much less when in idle mode. Connection to your PC is via USB cable (supplied).
Consumables:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Using the 641PS without a PC is simplicity itself. There are two slots on the right hand side of the front of the unit that can accept either SmartMedia, CompactFlash card, MultiMedia, Secure Digital & Memorystick. Xd memory can also be used with an