Kodak 1400 - Installing your Printer (4 of 8) A Step by step guide to installing your Kodak 1400 printer with a PC

Installing your KODAK 1400 Photo Printer
There are eight simple steps that need to be followed. Take each step one at a time, read the instructions carefully and you should have no problems at all. If you have any problems during installation then contact us.

Each step is described in detail:

Step 1 - Find a suitable location
Step 2 - Unpack the Printer
Step 3 - Load the Ribbon Carrier
Step 4 - Install the Printer Driver
Step 5 - Connect the USB
Step 6 - Load the Paper Tray
Step 7 - Install the Dust Cover
Step 8 - Make a Test Print

 

Step 4 of 8 - Install the Printer Driver

IMPORTANT: You must install the printer driver before you connect the USB Cable. The following instructions assume that you are familiar with MICROSOFT WINDOWS or MACINTOSH Operating Systems and terminology.

• Turn OFF the 1400 Printer.
  
  
• Insert the CD in the CD drive on your computer.
  
  
• Select your language.
  
  
• Select Printer Driver.
  
  
• Follow the instructions to install the appropriate driver for your printer.
  
  
• Connect the 1400 Printer to your computer.
  
  
• Press the POWER switch to turn ON the printer.
  
  
• MACINTOSH Operating System only:
  
  You must add the printer to the list of available printers.
  
  A) Launch the Printer Setup Utility (Applications / Utilities / Printer Setup Utility).
  B) Select the Add button.
  C) Select the USB selection type from the drop-down menu.
  D) Select the printer name, then click the Add button.
  
  The 1400 printer appears in the list of printers installed in the Printer Setup Utility.
  
  
• The printer driver should now be fully installed.
  
  
  

Step 5 - Connect the USB