Kodak 1400 - Installing your Printer (6 of 8) A Step by step guide to installing your Kodak 1400 printer with a PC

Installing your KODAK 1400 Photo Printer
There are eight simple steps that need to be followed. Take each step one at a time, read the instructions carefully and you should have no problems at all. If you have any problems during installation then contact us.

Each step is described in detail:

Step 1 - Find a suitable location
Step 2 - Unpack the Printer
Step 3 - Load the Ribbon Carrier
Step 4 - Install the Printer Driver
Step 5 - Connect the USB
Step 6 - Load the Paper Tray
Step 7 - Install the Dust Cover
Step 8 - Make a Test Print

 

Step 6 of 8 - Load the Paper Tray

• Push the plastic paper support on the paper tray until you hear a click.
  
  
  

• Adjust the paper tray to fit the paper you are loading. Do not force paper that is too long or too wide into the tray.
  
  Move the paper width adjuster to the correct position for either 12 in., 14 in., or A4 size paper.
  
  Slide the paper length adjuster to the correct position for the length of the paper you are loading. Make sure that the paper length adjuster is locked into position.
  
  
  

• Remove the paper from the package.
  
  Note: The paper may stick together. Loosen the pages well before unpacking. Handle the paper by the edges to avoid fingerprints on the top sheet.
  
  
  

• Place the paper in the tray with the logo side down, (as shown in the label on the tray), making sure that the front corners of the stack are under the metal tabs.
  
  Note: One package includes 25 or 50 sheets of paper. You can load up to 50 sheets of paper in the paper tray.
  

• Set the clear cover on the paper tray.
  
• Install the paper tray in the 1400 Printer.
  
  
  

Step 7 - Install the Dust Cover